YES-2000C electro-hydraulic pressure testing machine

Categories: Alat Pengujian

Section:Material Testing Machine

Type: Pressure Testing Machine

Seller:

OverView

YES-2000C electro-hydraulic pressure testing machine is mainly used for compression test of a variety of materials such as: cement, concrete, bricks of various construction, rubber, concrete, metal member or the like compressive strength test.

The whole machine of the test machine is mainly composed of four parts: main engine, oil source, control cabinet and digital display. The machine uses the hydraulic system to apply the test force. The test data is measured by the oil pressure sensor, and the digital tube display has the functions of peak hold and load speed display.

The main machine of the ? test machine is a four-column frame type loading mechanism. The beam is supported by the four columns on the base, and is fastened by a nut to form a loading frame. The upper pressure plate is mounted on the lower end of the screw of the beam, and the speed reducer is equipped with a driving sprocket, and the driven sprocket drives the driven sprocket through the chain, and then the driven sprocket drives the nut to rotate, so that the upper pressure plate mounted on the screw follows The screw moves up and down. A working table is arranged on the upper end of the cylinder piston, and a lower pressing plate is placed on the working table. The concentric circle of the lower platen is for the purpose of conveniently placing the sample, and the oil pipe on the main machine is in communication with the electric control cabinet. The electromechanical control cabinet and mainframe design were patented for appearance.

Serial number	Technical name	Technical Parameters
1	Maximum test force ( kN )	2000
2	Test force measurement range	4%-100% of the maximum test force
3	Test force indication relative error	≤ indication of ± 1%
4	Upper and lower platen maximum distance ( mm )	420
5	Upper and lower platen size ( mm )	Φ300
6	Piston stroke ( mm )	0-100
7	Maximum speed of piston no-load rise ( mm/min )	About 30
8	Column clearance ( mm )	368×318
9	Oil pump motor power ( kW )	1.5
10	Lift motor power ( kW )	0.55
11	Test machine mainframe dimensions (length x width x height) ( mm )	590×580×2050
12	Dynamometer dimensions (length xwidth x height) ( mm )	550×610×1110
13	Host quality ( kg )	About 1470
14	Dynamometer mass ( kg )	About 400

Serial number	name	specification	Quantity	Remarks
1	Host		1 set
2	Dynamometer		1 set
3	Oil pressure sensor	CYB-12SA	1 Zhi	AVIC
4	Upper and lower platen ( mm )	Φ300	1 set
5	Random tool		1 set
6	random document		1 set

The number shows the test force and the loading speed in a timely manner;
The whole process is not divided into the force value measurement, with protection function and stop point setting function;
Test force zeroing, peak hold, parameter setting and calibration;
LCD display, with easy-to-understand debugging features;
has calibration value display and calibration function;
has the results of printing. (requires special order)