WAW-1000A/2000A microcomputer controlled electro-hydraulic servo universal testing machine

Categories: Alat Pengujian

Section:Material Testing Machine

Type: Hydraulic Universal Testing Machine

Seller:

OverView

WAW-1000A/2000A microcomputer controlled electro-hydraulic servo universal testing machine is mainly used for tensile, compression, bending, shearing and other tests of metal materials, adding simple accessories and devices, and also for wood, cement, concrete, rubber and Its products are tested.

The main engine adopts the upper structure of the oil cylinder, and the stretching space is located below the main machine. The compression and bending test space is located between the oil cylinder seat and the upper jaw base of the main machine, and the test space is adjusted by the movement of the upper jaw seat.

The measurement and control system adopts the microcomputer-controlled electro-hydraulic servo measurement and control system independently researched and developed by the company. The force measurement of the sensor and the display of the test force, deformation and various test curves on the computer screen enable constant velocity test force, constant velocity deformation, constant velocity displacement and load retention. , displacement maintenance and other control methods, can automatically calculate various values in accordance with GB/T228-2002 , and can print a variety of test reports (requires special customization), users can also edit the format of the test report.

Serial number	Technical indicators		WAW-1000A	WAW-2000A
1	Maximum test force kN		1000	2000
2	Test force accuracy		± 1%
3	Test force measurement range		2%~100% of the maximum test force is not divided
4	Test space (including piston stroke) length mm	Stretch	780	850
5		compression	650	720
6	Distance between columns (mm)		Pull 675	Pull 900
7			Pressure 490	Pressure 690
8	Host weight (KG)		5000	10400
9	Deformation measuring amplifier attenuation factor		2%~100% is not divided
11	Round specimen clamping diameter range mm		Φ 13 ?Φ 60	Φ 15 ?Φ 70
12	Flat specimen clamping thickness range mm		0-40	0~50
13	Flat specimen clamping width mm		125	140
14	Upper and lower platen size (mm)		204*204	204*204
15	Curved stick spacing mm		100	1000
16	Bending rod width mm		140	140
17	Allowable bending mm		150	190
18	Oil pump motor power kW		3	7
19	Deformation measuring device		Extensometer
20	Test space adjustment mechanism		Ordinary motor worm gear
twenty one	Safety device		Software protection and mechanical limit protection
twenty two	Overload protection		2%-5%
twenty three	Test software configuration		Trial software
twenty four	Mainframe dimensions (including piston stroke) mm		12558603900	151010404700
25	Control cabinet dimensions		Integrated control cabinet 1100700930
26	Piston moving speed (mm/min)		≥50