ConLab 0-150 Volt AC Transmitter Sensor - T-CON-ACT-150

Categories: Data Logger
Section:AC/DC Volatage
Type:
Seller:    

OverView

Transformator bertenaga 0-150 volt self-powered untuk memantau gelombang sinus, tegangan AC satu fasa. Memerlukan Kabel Input untuk digunakan dengan penebang U12.

Requirements

  • For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
  • For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)
  • Ranges: 0–150 volts RMS
  • Sensor accuracy: < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range)
  • Overrange: +20% of span
  • Overload: +40% of span
  • Frequency: 60 Hz AC
  • Supply: Self-powered
  • Output: 0–20 mA
  • Response time to 90% 
  • Operating conditions: -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing
  • Housing: Plastic polycarbonate
  • Protection Level
  • Box: According to IP-50 DIN 40050
  • Terminals: According to IP-10 DIN 40050
  • Mounting: Standard 35mm DIN rail
  • Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.
  • Colokkan langsung ke jack masukan eksternal UFO atau tipe logger ZW untuk memperluas jangkauan pilihan pengukuran dan aplikasi

Documentation.

Resources.